ADUC7060BSTZ32 ARM Microcontroller MCU with 24-bit ADC 32 kB Flash Memory and 10.24 MHz Clock Frequency

• Dual (24-bit) ADCs
• Single-ended and differential inputs
• Programmable ADC output rate (4 Hz to 8 kHz)
• Programmable digital filters
• Built-in system calibration
• Low power operation mode
• Primary (24-bit) ADC channel
• 2 differential pairs or 4 single-ended channels
• PGA (1 to 512) input stage
• Selectable input range: ±2.34 mV to ±1.2 V
• 30 nV rms noise
• Auxiliary (24-bit) ADC: 4 differential pairs or 7 singleended channels
• On-chip precision reference (±10 ppm/°C)
• Programmable sensor excitation current sources
• 200 μA to 2 mA current source range
• Single 14-bit voltage output DAC

• ARM7TDMI core, 16-/32-bit RISC architecture
• JTAG port supports code download and debug
• Multiple clocking options

• 32 kB (16 kB * 16) Flash/EE memory, including 2 kB kernel
• 4 kB (1 kB * 32) SRAM

• In-circuit download, JTAG based debug
• Low cost, QuickStart™ development system

• SPI interface (5 Mbps)
• 4-byte receive and transmit FIFOs
• UART serial I/O and I
• 2C (master/slave)

• 4* general-purpose (capture) timers including
• Wake-up timer
• Watchdog timer
• Vectored interrupt controller for FIQ and IRQ
• 8 priority levels for each interrupt type
• Interrupt on edge or level external pin inputs
• 16-bit, 6-channel PWM
• General-purpose inputs/outputs
• Up to 14 GPIO pins that are fully 3.3 V compliant

• AVDD/DVDD specified for 2.5V (±5%)
• Active mode: 2.74 mA (@ 640 kHz, ADC0 active)
• 10 mA (@ 10.24 MHz, both ADCs active)

• Fully specified for −40°C to +125°C operation
• 32-lead LFCSP (5 mm * 5 mm)
• 48-lead LFCSP and LQFP

• 32-lead LFCSP (ADuC7061)
• 48-lead LQFP and 48-lead LFCSP (ADuC7060)

• Industrial automation and process control
• Intelligent, precision sensing systems, 4 mA to 20 mA
• loop-based smart sensors

The ADuC706x series are fully integrated, 8 kSPS, 24-bit data acquisition systems incorporating high performance multichannel sigma-delta (Σ-Δ) analog-to-digital converters (ADCs), 16-bit/ 32-bit ARM7TDMI® MCU, and Flash/EE memory on a single chip. The ADCs consist of a primary ADC with two differential pairs or four single-ended channels and an auxiliary ADC with up to seven channels. The ADCs operate in single-ended or differential input mode. A single-channel buffered voltage output DAC is available on chip. The DAC output range is programmable to one of four voltage ranges.

The devices operate from an on-chip oscillator and a PLL generating an internal high frequency clock up to 10.24 MHz. The microcontroller core is an ARM7TDMI, 16-bit/32-bit RISC machine offering up to 10 MIPS peak performance; 4 kB of SRAM and 32 kB of nonvolatile Flash/EE memory are provided on chip. The ARM7TDMI core views all memory and registers as a single linear array.

The ADuC706x contains four timers. Timer1 is a wake-up timer with the ability to bring the part out of power saving mode. Timer2 is configurable as a watchdog timer. A 16-bit PWM with six output channels is also provided. The ADuC706x contains an advanced interrupt controller. The vectored interrupt controller (VIC) allows every interrupt to be assigned a priority level. It also supports nested interrupts to a maximum level of eight per IRQ and FIQ. When IRQ and FIQ interrupt sources are combined, a total of 16 nested interrupt levels issupported. On-chip factory firmware supports in-circuit serial download via the UART serial interface ports and nonintrusive emulation via the JTAG interface. The parts operate from 2.375 V to 2.625 V over an industrial temperature range of −40°C to +125°C.

Standard export packaging available. Customers can choose from cartons, wooden cases, and wooden pallets according to their requirements.

We typically provide quotations within 24 hours of receiving your inquiry (excluding weekends and holidays). For urgent pricing requests, please contact us directly.

Small batches typically ship within 7-15 days, while large batch orders may require approximately 30 days depending on order quantity and season.

Factory pricing with 30% deposit and 70% balance payment via T/T before shipment.

Available shipping methods include sea freight, air freight, and express delivery (EMS, UPS, DHL, TNT, FEDEX). Please confirm your preferred method before ordering.