|
Szczegóły Produktu:
Kontakt
Rozmawiaj teraz.
|
| Temperatura pracy: | -40 ℃ ~ + 85 ℃ | Napięcie robocze: | 2,7 V ~ 3,6 V |
|---|---|---|---|
| Typ interfejsu: | Równoległy | Pojemność pamięci: | 8Gbit |
| Częstotliwość zegara (fc): | - | Czas zapisu strony (Tpp): | 200us |
| Podkreślić: | 8Gb NAND Flash Memory,NAND Flash with high reliability,Flash memory with data retention |
||
| Signal | Type | Description |
|---|---|---|
| ALE | Input | Address latch enable: Loads an address from I/O[7:0] into the address register. |
| CE# | Input | Chip enable: Enables or disables one or more die (LUNs) in a target. |
| CLE | Input | Command latch enable: Loads a command from I/O[7:0] into the command register. |
| LOCK | Input | When LOCK is HIGH during power-up, the BLOCK LOCK function is enabled. |
| RE# | Input | Read enable: Transfers serial data from the NAND Flash to the host system. |
| WE# | Input | Write enable: Transfers commands, addresses, and serial data from the host system to the NAND Flash. |
| WP# | Input | Write protect: Enables or disables array PROGRAM and ERASE operations. |
| I/O[7:0] (x8) I/O[15:0] (x16) |
I/O | Data inputs/outputs: The bidirectional I/Os transfer address, data, and command information. |
| R/B# | Output | Ready/busy: An open-drain, active-low output that requires an external pull-up resistor. |
| VCC | Supply | VCC: Core power supply |
| VSS | Supply | VSS: Core ground connection |
| NC | - | No connect: NCs are not internally connected. They can be driven or left unconnected. |
| DNU | - | Do not use: DNUs must be left unconnected. |
Osoba kontaktowa: Mr. Sun
Tel: +8618824255380