|
Détails sur le produit:
Contact
Causez Maintenant
|
| Type de puce: | Commutateur de distribution d'énergie | Tension de fonctionnement: | 2,2 V ~ 16 V |
|---|---|---|---|
| FB, Tensions: | -0.3V à 6V | Dissipation de puissance: | 0.6W |
| ESD MM: | 200V | Plage de température de fonctionnement (°C): | -40°C à +85°C |
| Mettre en évidence: | MT3608L step-up converter,2.5A power management chip,1.2MHz current mode booster |
||
| Pin Name | Pin Number | Description |
|---|---|---|
| SW | 1 | Power Switch Output. SW is the drain of the internal MOSFET switch. Connect the power inductor and output rectifier to SW. SW can swing between GND and 22V. |
| GND | 2 | Ground Pin |
| FB | 3 | Feedback Input. The FB voltage is 0.6V. Connect a resistor divider to FB. |
| EN | 4 | Regulator On/Off Control Input. A high input at EN turns on the converter, and a low input turns it off. When not used, connect EN to the input supply for automatic startup. |
| VIN | 5 | Input Supply Pin. Must be locally bypassed. |
| OC | 6 | Adjustable Current Limit (Floating Available). |
Personne à contacter: Mr. Sun
Téléphone: +8618824255380