GD25Q40CTIG 3.3V Uniform SectorDual And Quad Serial Flash 120MHz 600us SPI

• 4M-bit Serial Flash
  • 512K-byte
  • 256 bytes per programmable page
• Fast Program/Erase Speed
  • Page Program time: 0.6ms typical
  • Sector Erase time: 45ms typical
  • Block Erase time: 0.15/0.25s typical
  • Chip Erase time: 2s typical
• Standard, Dual, Quad SPI
  • Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD#
  • Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD#
  • Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3
• Flexible Architecture
  • Uniform Sector of 4K-byte
  • Uniform Block of 32/64k-byte
• High Speed Clock Frequency
  • 120MHz for fast read with 30PF load
  • Dual I/O Data transfer up to 240Mbits/s
  • Quad I/O Data transfer up to 480Mbits/s
• Low Power Consumption
  • 20mA maximum active current
  • 5uA maximum power down current
• Software/Hardware Write Protection
  • Write protect all/portion of memory via software
  • Enable/Disable protection with WP# Pin
  • Top/Bottom Block protection
• Advanced Security Features(1)
  • 128-Bit Unique ID for each device
  • 4*256-Byte Security Registers With OTP Locks
  • Discoverable parameters(SFDP) register
• Minimum 100,000 Program/Erase Cycles
• Single Power Supply Voltage
  • Full voltage range:2.7~3.6V

Standard export packaging available. Customers can choose from cartons, wooden cases, and wooden pallets according to their requirements.