USB3300-EZK USB Interface IC with USB 2.0 PHY ULPI Hi-Speed Certified in QFN-32 Package

• USB-IF Hi-Speed certified to the Universal Serial Bus Specification Rev 2.0
• Interface compliant with the ULPI Specification revision 1.1 in 8-bit mode
• Industry standard UTMI+ Low Pin Interface (ULPI) Converts 54 UTMI+ signals into a standard 12 pin Link controller interface
• 54.7mA Unconfigured Current (typical) - ideal for bus powered applications
• 83uA suspend current (typical) - ideal for battery powered applications
• Latch-Up performance exceeds 150 mA per EIA/JESD 78, Class II
• ESD protection levels of 8kV HBM without external protection devices
• Integrated protection to withstand IEC61000-4-2 ESD tests (8kV contact and 15kV air) per 3rd party test facility
• Supports FS pre-amble for FS hubs with a LS device attached (UTMI+ Level 3)
• Supports HS SOF and LS keep-alive pulse
• Includes full support for the optional On-The-Go (OTG) protocol detailed in the On-The-Go Supplement Revision 1.0a specification
• Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
• Allows host to turn VBUS off to conserve battery power in OTG applications
• Supports OTG monitoring of VBUS levels with internal comparators. Includes support for an external VBUS or fault monitor.
• Low Latency Hi-Speed Receiver (43 Hi-Speed clocks Max) allows use of legacy UTMI Links with a ULPI wrapper
• Integrated Pull-up resistor on STP for interface protection allows a reliable Link/PHY start-up with slow Links (software configured for low power)
• Internal 1.8 volt regulators allow operation from a single 3.3 volt supply
• Internal short circuit protection of ID, DP and DM lines to VBUS or ground
• Integrated 24MHz Crystal Oscillator supports either crystal operation or 24MHz external clock input
• Internal PLL for 480MHz Hi-Speed USB operation
• Industrial Operating Temperature -40C to +85C
• 32 pin, QFN RoHS Compliant package (5 x 5 x 0.90 mm height)

The USB3300 is the ideal companion to any ASIC, SoC or FPGA solution designed with a ULPI Hi-Speed USB host, peripheral or OTG core.

The USB3300 is well suited for:

• Cell Phones
• PDAs
• MP3 Players
• Scanners
• External Hard Drives
• Digital Still and Video Cameras
• Portable Media Players
• Printers

Note: The USB330 uses the AutoResume feature, Section 6.3, for host start-up of less than 1ms.

Standard export packaging available. Customers can choose from cartons, wooden cases, and wooden pallets according to their requirements.

How to obtain the price?

We typically provide quotations within 24 hours of receiving your inquiry (excluding weekends and holidays). For urgent pricing requests, please contact us directly.

What is your delivery time?

Small batches typically ship within 7-15 days, while large batch orders may require approximately 30 days depending on order quantity and season.

What are your payment terms?

Factory pricing with 30% deposit and 70% balance payment via T/T before shipment.

What are the shipping options?

Available shipping methods include sea freight, air freight, and express delivery (EMS, UPS, DHL, TNT, FEDEX). Please confirm your preferred method before ordering.