MT25QL01GBBB8ESF-0SIT 1Gb 3V Multi-I/O Serial Flash Memory NOR Flash

• Stacked device (two 512Mb die)
• SPI-compatible serial bus interface
• Single and double transfer rate (STR/DTR)
• Clock frequency– 133 MHz (MAX) for all protocols in STR– 90 MHz (MAX) for all protocols in DTR
• Dual/quad I/O commands for increased throughput up to 90 MB/s
• Supported protocols: Extended, Dual and Quad I/Oboth STR and DTR
• Execute-in-place (XIP)
• PROGRAM/ERASE SUSPEND operations
• Volatile and nonvolatile configuration settings
• Software reset
• Additional reset pin for selected part numbers
• 3-byte and 4-byte address modes – enable memoryaccess beyond 128Mb
• Dedicated 64-byte OTP area outside main memory– Readable and user-lockable
• Erase capability– Die Erase– Sector erase 64KB uniform granularity– Subsector erase 4KB, 32KB granularity
• Erase performance: 400KB/sec (64KB sector)
• Erase performance: 80KB/sec (4KB sub-sector)
• Program performance: 2MB/sec
• Security and write protection– Volatile and nonvolatile locking and softwarewrite protection for each 64KB sector– Nonvolatile configuration locking– Password protection– Hardware write protection: nonvolatile bits(BP[3:0] and TB) define protected area size– Program/erase protection during power-up– CRC detects accidental changes to raw data
• Electronic signature– JEDEC-standard 3-byte signature (BA21h)– Extended device ID: two additional bytes identifydevice factory options
• JESD47H-compliant– Minimum 100,000 ERASE cycles per sector– Data retention: 20 years (TYP)

• Voltage– 2.7–3.6V L
• Density– 1Gb 01G
• Device stacking– 2 die stacked B
• Device generation B
• Die revision B
• Pin configuration– HOLD# 1– RESET and HOLD# 8
• Sector Size– 64KB E
• Packages – JEDEC-standard, RoHScompliant– 24-ball T-PBGA 05/6mm x 8mm(TBGA24)12– 16-pin SOP2, 300 mils (SO16W,SO16-Wide, SOIC-16)SF– W-PDFN-8 8mm x 6mm (MLP8 8mmx 6mm)W9
• Security features– Standard security 0
• Special options– Standard S– Automotive A
• Operating temperature range– From –40°C to +85°C IT– From –40°C to +105°C AT– From –40°C to +125°C UT

Standard export packaging available. Customers can choose from cartons, wooden cases, and wooden pallets according to their requirements.